Eikon Green Monster Tattoo Machine

Eikon Green Monster Tattoo Machines are based on the project machine that was featured in the first five issues of Machinegun Magazine.
The frame is a straightforward welded construction, steel side plate design, with a precision machined, two-piece, quick-change tube vise.

We stock 2 versions of this machine - a shader and a colouring machine.
All Green Monster Machines are built with 8 wrap Eikon Crown Standard coils and Tru-Spring armature bars and springs.

The Shader Machine has a mid-weight armature bar, a 33uF capacitor, and a 0.016" thick timing spring with a 0.017" thick main spring.
The air gap on the Shader Machine is 1/16" (nickel), resulting in a speed of approximately 110 Hz with a tube and needle set up in the machine.

The Colouring Machine has a heavy-weight armature bar, a 47uF capacitor, and a 0.015" thick timing spring with a 0.016" thick main spring.
The air gap on the Colouring Machine is 1/16" (nickel), resulting in a speed of approximately 100 Hz with a tube and needle set up in the machine.

All Green Monster Tattoo Machines are painted industrial tractor green and weigh 7.7 ounces (without a tube or grip).
Machines come complete and ready to use, but some fine tuning or adjustment may be required to get the machine running to each tattoo artist's preference.

Weight: 218g